Micronizer mill under the condition of the same material and finished product fineness, impact crusher and turbine crusher wear parts service life is long, generally can reach more than a year.

First High safety and reliability

MIcronizer mill due to the grinding chamber without rolling bearings, screws, therefore, the bearing and sealing elements will not, there is no screw loose easily and destroy the machine problem.

Second The micronizer mill product fineness high fineness of one-time can achieve d97 5 microns or less

 

Third The micronizer mill of environmental protection

Pulse dust catcher and the use of the muffler to reduce dust pollution and noise, to achieve national environmental standards, on the surrounding environment have played an important role in environmental protection.

Micronizer mill main use:

HGM series micronizer mill is a kind of fine powder and ultrafine powder processing equipment, it is mainly suitable for medium, low hardness, mohs hardness < 6 of flammable and explosive of brittle materials, such as calcite, chalk, limestone, dolomite, kaolin, talc, mica, bentonite, magnesite, illite and pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum stone, graphite, fluorite, phosphate rock, potassium ore, pumice, etc.

 

High pressure micronizer mill and maintenance:

First    host, center bearing every class four refueling, blower bearing oil once a month.

Second   bearing room temperature shall not exceed 70 degrees.

Third    replacing roller set, roller bearing and the bearing chamber should be cleaned.

Fourth   bearing during installation to ensure that the appropriate clearance.